Formwork Repair PRO Kit

Professional repair kit for Formwork Panels

Complete and professional kit for repairing formwork panels. This complete Formwork Repair Pro Kit contains the best system for damage repair of formwork panels. It is a complete case with all the necesarry components to make perfect repairs. It is perfect for bigger productions and industry use with on-going repairs.  


♦   2x bags of Knot Filler (9 sticks of 300mm, Ø12mm)
♦   1x BCD 360 Repair Gun 300W 
♦   1x Cooling iron with handle (180x80mm)
♦   1x Cutting tool
♦   Manual

  • Plastic case

Formwork Repair PRO Kit

How does it work?

Get started with your Formwork Repair Pro Kit this easy: 

1. Turn on the BCD360 Repair Gun and let it heat for 3-5 minutes.
2. Put a Repair stick in BCD360 Repair gun
3. Shoot the Repair Filler into the damage in the formwork panel. Make sure to use a good speed.
4. Quickly put on a cooling iron and cool off the repair.
5. Cut off excess Repair Filler with a cutting tool, and done! 
6. Note: The Repair Filler is ready for cutting when the cooling iron easily comes off the Repair Filler.

  • Never place the Repair Gun on the side - leave in standing position (see MSDS)
  • Never pull out a Repair stick out of the gun! (see MSDS)
  • Seal the bag of Repair Filler after use. For instance with masking tape (see MSDS)

Use the Formwork Repair Pro Kit for repairs in: