Wood Repair tools
Popular products
All products
BCD 360 Knot Filler gun
The BCD 360 Knot Filler gun is specifically design for Knot Filler application. It is a professional, robust tool perfect for industrial requirements and long-term use. With the BCD 360 Knot Filler gun it is easy to repair all sorts of knots, grains, cracks, edge and corner repairs etc. in wood.
PRODUCT INFO:
Professional, robust Knot Filler gun
Accepts D Ø12 mm sticks
Perfect for industrial requirements and long-term use
External, adjustable thermostat 140°C - 230°C
Quick pre-heat, only 3 minutes
300 watt gun, weight 600g
Changable nozzle. For instance 1,5 mm or 3 mm
PACKAGING:
Comes in a plastic case with extra nozzle and manual
BCD180 Knot Filler gun
The BCD 180 Knot Filler gun is a basic Knot Filler gun developed for Knot Filler application. It is perfect for window- and floor installers, carpenters, maintenance, and DIY'ers who need to repair knots, cracks etc. in wood from time to time.
PRODUCT INFO:
Basic Knot Filler Gun w. cord.
Accepts D 12mm sticks.
Pre-adjusted temperature 170°C.
Pre-heat approx. 7 minutes.
Changeable nozzle.
PACKAGING:
Case (hard plastic) and manual
Included in the Wood Repair Basic Kit and Wood Repair Plus+ Kit
New
BCD540 Knot Filler gun
The BCD540 Knot Filler gun is a cord-free, battery-driven tool specifically deveoped for Knot Filler application. The cord-free Knot Filler gun gives you the advantage of freedom-of-movement to repair knots, cracks, grains, etc. in all types of locations. It is a professional, light-weight model with an ergonomic design and quick pre-heating.
PRODUCT INFO:
Professional, battery-driven, cord-free Knot Filler gun
Accepts D Ø12 mm sticks
Functioning time on fully charged battery 100-120 min (2.0Ah)
Fixed temperature setting 170°C
Approx. 7 minutes heating time
Two battery options 18V 2.0Ah or 18V 5.A0h
PACKAGING:
Comes in a case with a Lithium-Ion Battery 2.0Ah and Charger
Cleaning Granulate
This Cleaning Granulate is specifically developed for cleaning polyamide (PA) residue. The Cleaning Granulate is perfect for cleaning tank systems, used for granulate with a polyamide base. It is also useful for cleaning nozzles, tubes etc.
PRODUCT INFO:
Removes polyamide (PA) residue
Perfect for cleaning tanks that process polyamide
Useful for nozzles, tubes, tanks, etc.
Cleaning oil
The BCD Cleaning Oil is a good way to clean and remove polyamide (PA) leftovers from the tank system in granulate guns. The Cleaning oil is, furthermore, perfect for cleaning polyamide residue from nozzle, i.e. the nozzles suitable for the BCD360 Knot Filler gun.
CLEANING OF NOZZLE:
Bring the Cleaning Oil to boil in a pot and soak the nozzle in the oil.
Let the nozzle soak in the boiling oil for minimum 1 hour
Pick up the nozzle and wipe it with a cloth
The oil can be reused several times
CLEANING OF TANK SYSTEMS:
Pre-heat the Granulat gun and empty it from Knot Filler
Fill half of the tank with cleaning oil and heat up the oil
Press out a bit of oil and wait 5 minutes. Repeat this until all oil is out of the tank.
Fill the tank with granulate and through away the first portion.
After this, the tank system is clean and the Granulate gun is ready for use
Cooling brick 50x50mm
The BCD Cooling brick is a perfect tool to have at hand when repairing wood with Knot Filler. The Cooling brick is perfect for smaller knots, grains, and cracks. It is easy to grap and put on the warm Knot Filler. The Cooling brick presses the Knot Filler into the repair, which increase durability, and it quickly cools of the Knot Filler so it is ready to be cut.
PRODUCT INFO:
Cooling brick in aluminum
Size: 50x50mm
Perfect for smaller repairs as well as edge and corner repairs
Useful for repairs in both wood and formwork panels
PAKNING:
Included in the Wood Repair Pro Kit, Wood Repair Battery Kit, and Wood Repair Plus+ Kit
Cooling iron 80x180mm
This Cooling iron is a perfect tool to have at hand when making wood repairs with Knot Filler. Place the Coolin iron on top of the warm Knot Filler after it has been shot into the knot/repair. The Cooling iron presses the Knot Filler into the repair and increases the durability of the Knot Filler and quickly cools the repair so it is ready to be cut and sanded.
PRODUCT INFO:
Cooling iron in aluminum with a handle in hard plastic
Size: 80x180mm
Perfect for bigger and longer repairs
Useful for repairs in wood and formwork panels
PACKAGING:
The Cooling iron is included in the Wood Repair Pro Kit and Wood Repair Battery Kit
Cutting tool
Perfect cutting tool to remove excess Knot Filler. The cutting has an ergonimic design which makes it easy to use when cutting off excess Knot Filler. The cutting tool is perfect for repairing edge and corner repairs.
PRODUCT INFO:
♦ Cutting tool with beech handle and sharp steel blade.
♦ Ergonomic design
♦ Size: 90 mm length, 50 mm width
MORE INFO:
• Suitable tool for both wood and formwork repairs
• The Cutting tool is included in the Wood Repair Pro Kit & Wood Repair Battery Kit
New
Cutting tool PRO
Professional Cutting Tool that easily removes excess Knot Filler. This professional cutting tool is perfect for bigger and/or longer repairs with Knot Filler in both wood and formwork panels. It is perfect for a two-hand-grip and thus increase safety when cutting off excess Knot Filler.
PRODUCT INFO:
♦ Professinal Cutting Tool ♦ Increased safety ♦ Very effective
♦ Easy to use ♦ Perfect for two-hand-grip ♦ Can be resharpened many times ♦ Spare blade can be purchased
Size: Lenght 320mm, Width 105mm
Knot Filler Saver
The Knot Filler Saver is a useful tool to have at hand when repairing with Knot Filler. The Knot Filler Saver makes it possible to save Knot Filler between color change, which otherwise might be wasted. It is easy to use, just form new sticks in the Knot Filler Saver, let the new sticks dry, and finally seal them in a bag. It is a good way to use all resources with minimum waste.
PRODUCT INFO:
♦ Flexible mold of silocone, green color.
♦ Size: 60x45x35 mm
♦ Easy to form new Knot Filler sticks when changing color
♦ Form new sticks Ø12 mm
IMPORTANT:
• Remember to pack the new sticks in a tightly seal aluminum bag after they have hardened.
Magnum Quickstick
Magnum Quickstick is a cleaning stick suitable for small and fast cleaning of sanding belts. It is easy to use and cleans the sanding belts completely thus increasing the sanding quality.
PRODUCT INFO:
Easy to use - use right away
Suitable for minor cleaning of sanding belts
Size: 50x50x305mm
Increases the life time of the sanding belts
Increases the sanding quality
Cleans sanding belts completely and dryly
PACKAGING:
Send a request to: info@woodrepair.dk
Mixing Bowl for Powder Filler
Smart and flexible mixing bowl developed for mixing Powder Filler. Use the Mixing Bowl to mix Powder Filler with water. The mixing bowl is flexible which makes is an ideal tool when mixing the raw Powder Filler with water. Easy to clean with finger-warm water.
PRODUCT INFO:
Perfect tool for wood repairs with Powder Filler
Flexible bowl which makes it easy to mix powder and water
Easy to clean after use
Size approx..: h: 120mm, w: 90mm
Original nozzles
The original nozzles fit the professional BCD360 Knot Filler gun and the BCD180 Knot Filler gun. The original nozzles are available in two different sizes, i.e. 1.5mm and 3mm. The nozzles are of high quality and are easy to change on the BCD360 and BCD180 Knot Filler guns.
SIZE:
• D 1,5 mm (short tip, see photo)
• D 3 mm (long tip, see photo)
EXTRA INFO:
• Both nozzles are included in the Wood Repair Pro Kit
• The nozzles can be cleaned with the BCD Cleaning oil
Powder Hardener
The Powder Hardener is a good supplement when using Powder Filler to repair cracks, knots, and other defects in wood. The Powder Hardener makes it possible to increase the strength of Powder Filler even more, which makes it a popular product in flooring industries. The Powder Hardener is easy to use. Follow the guidelines below when mixing the Powder Hardener with Powder Filler and water.
PRODUCT INFO:
♦ Mixing ratio: 3 parts Powder Filler, 1 part water (10-20% of the water must be replaced with Powder Hardener)
♦ Increases the strength of Powder Filler even more
♦ Increase the Powder Fillers resistency towards water
♦ Fastens the drying time of Powder Filler repairs
PACKAGING:
• 750 ml plastic bottle with tip
New
SafeCut
New Knot Filler cutting tool with increased safety. The SafeCut cutting tool is designed with a belt that protects the user when cutting off excess Knot Filler. The integrated safety belt on the SafeCut cutting tool works as a "shield" for the sharp steal blade. The SafeCut has an ergonomic design and perfect grib. The blade is attached with two screws and is, therefore, easy to detach if you wish to sharpen or replace the blade. A perfect tool for our Knot Filler system.
PRODUCT INFO:
Cutting tool with increased safety
Material: PVC and steal blade
Size: approx. 90 mm length, 50 mm width
MORE INFO:
Useful for Knot Filler repairs in both wood and formwork
SafeCut cutting tool is not included in any of our kits
Sold as a separate tool
TR55 Granulate gun
The TR55 Granulate gun is a professional tool perfect for application of Knot Filler Granulate. The built-in electronic temperature regulation allows the TR55 Granulate Gun to work fast and precise. The temperature regulation keeps the temperature on a constant level, which makes the TR55 gun perfect for temperature-sensitive fillers such as Knot Filler. The Knot Filler granulate is extruded through air pressure, which increases work speed and simplifies the exact dosing of Knot Filler. Finally, the large tank of 300 ml allows continuous work for a long period of me.
PRODUCT INFO:
Built in electronic temperature regulation
Ready to work within 3 to 10 minutes
LCD display = Easy and precise temperature adjustments - the user always knows the current temperature
Keeps the temperature on a constant level
Tank with 330 ml capacity = continuous work for a long time
No o-rings in the system = no complex replacements thereof